- Pumps[10]
- AC Motor[1]
- Other Motor[3]
- Impellers[3]
- Pneumatic Tools[1]
- Pump Shaft[3]
- Energy Saving Equipment Parts[1]
- Inverters & Converters[2]
- Other Switches[1]
- Motor Controller[1]
- Pressure Switches[1]
- Other Watering & Irrigation[1]
- Other Home Appliance Parts[7]
- Other Household Cleaning Tools & Accessories[4]
- Water Treatment[10]
- Pool & Accessories[6]
- Other Industrial Filtration Equipment[5]
- Contact Person : Mr. SYD Hunter
- Company Name : Ningbo Yinzhou H.T. Industry Co., Limited
- Tel : 86-574-27851893
- Fax : 86-574-27851890
- Address : Zhejiang,Ningbo,Room 1205, No.: 555, Yinzhou Centre District, Rilizhonglu
- Country/Region : China
- Zip : 315192
Automatic Pump Control Electronic Switch
Automatic Pump Control Electronic Switch, PS-02
| Operating Limits | |
| Liquid Temperature | up to 60 cent. degree |
| Ambient Temperature | up to 45 cent. degree |
| Max. Working Pressure | 10 Bar |
PS-2A Electronic SwitchDescriptions:1.Rated voltage:220V-240V 110V-115V2.Max.Current:10A3.Frequency:50/60Hz4.Max. power:1.1KW5.Joint Screw:1"6.Protection Grade:IP65 PS-2B Electronic SwitchDescriptions:1.Rated voltage:220V-240V 110V-115V2.Max.Current:10A3.Frequency:50/60Hz4.Max. power:1.1KW5.Joint Screw:1"6.Protection Grade:IP65 7. Starting Pressure adjustable from 1.5bar to 3.0 bar.
8. Coverage: As a completely new device, it can guarantee the optimum control of electric pumps used in a plumpimg systems.Being an intelligent mix of hydraulic and electronic engineering,the control maintains both pressure and flow and controls the operation of the pump automatically. It needs no pressure tank as in the traditional systems. There are no plenum chambers to recharge and no irritating variation in pressure and in flow at the point of use .No adjustment or maintenance is required. It is absolutely dependable,durable and simple to install.
9. Functioning: The starting operation archived,the unit is programmed to perform all the pump control operations automatically.When particular operational breakdowns occur, such as water failure,obstruction of the suction pipe,etc,the unit recognizes the breakdown and red led Failure lights up,at the same time a stop signal is sent to the pump to prevent damages caused by its working in the absence of water.Rectification of the failures that have caused the blockage,allows the system to be restarted by pressing the Reset button.
Automatic Pump Control Electronic Switch